Delta DRL-48V120W1EN Lyte II Serisi Din-Rail 120W 48V 2.5A Power Supply
Output | |
Output Current | 2.5A |
Output Voltage | 48V |
Output Voltage Range | 43.2-2.8Vdc |
Output Voltage Adjustment Range | 43.2-52.8Vdc |
Output Power | 120W |
Line Regulation | ± 0.5% @ 115Vac & 230Vac |
Load Regulation | ± 0.5% |
PARD | < 200mVpp @ 0°C to +70°C < 600mVpp @ -30°C to 0°C |
Start Up Time | 500ms typ. @ 115Vac & 230Vac |
Hold Up Time | 10ms typ. @ 115Vac (100% load) 16ms typ. @ 230Vac (100% load) |
Dynamic Response (overshoot & undershoot O/P Voltage) | ± 10% @ 115Vac & 230Vac input, 10-100% load (Slew Rate: 2.5A/μS, 50% duty cycle @ 5Hz & 10KHz) |
Start Up with Capacitive Loads | 3,000µF Max |
Rise Time | 30ms typ. @ 115Vac & 230Vac |
Input | |
Input Voltage | 100-240Vac |
Input Voltage Range | 90-264Vac |
Nominal Input Frequency | 50-60Hz |
Input Frequency Range | 47-63Hz |
Input Current | 2.1 typ. @115Vac, 1.3Atyp.@230Vac |
Efficiency at 100% load | 89.5%typ.@230Vac |
Max. Inrush Current | 35A typ.@230Vac |
Leakage Current | < 0.5mA @ 240Vac |
Case Chassis/Cover | Aluminum / SGCC |
Indicator | Green LED (DC OK) |
Cooling System | Convection |
Input Terminal | 3 pins (rated 300V/30A) |
Output Terminal | 4 pins (Rated 300V/20A) |
Noise Sound Pressure Level (SPL) | < 25dBA |
Mounting Rail | Standard TS35 DIN Rail in accordance with EN 60715 |
Unit Weight | 0.45kg (0.99 lb) |
Dimensions | 123.6 x 30 x 117.2 mm 4.87” x 1.18” x 4.61” |
Environment | |
Vibration (operating ) | IEC 60068-2-6, Sine Wave: 10Hz to 500Hz @ 19.6 m/s² (2G peak); 10 min per cycle, 60 min for X direction |
Shock Test (Operating) | IEC 60068-2-27, Half Sine Wave: 10G for duration of 11ms; 1 time in X axis |
Operating Temperature | -30°C to +70°C (-40°C Cold Start) |
Storage Temperature | -40°C to +85°C |
Power DE rating | > 40°C de-rate power by 1.67 % / °C @115Vac > 50°C de-rate power by 2.5 % / °C @230Vac |
Operating Humidity | 20 to 90% RH (Non-Condensing) |
Shock Test (non operating ) | IEC 60068-2-27, Half Sine Wave: 50G for duration of 11ms; 3 times per direction, 9 times in total |
Vibration (non operating) | IEC 60068-2-6, Random: 5Hz to 500Hz (2.09G); 20 min per axis for all X, Y, Z direction |
Operating Altitude | 0 to 5,000 Meters (16,400 ft.) |
Pollution Degree | 2 |
Over Voltage Category | II (Compliance to EN 62477-1 OVC III with 2000 meters altitude) |
Protections | |
Overvoltage | <64.8V, SELV Output, Latch Mode |
Overload / Overcurrent | 105 – 150% of rated load current, Auto-recovery Continuous current limit Mode*5 (Vo>80%) |
Over Temperature | Latch Mode |
Short Circuit | Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed) |
Protection Against Shock | Class I with Primary Earth connection |
Reliability | |
MTBF | > 700,000 hrs. as per Telcordia SR-332 I/P: 115Vac & 230Vac, O/P: 100% load, Ta: 25°C |
Expected Cap Life Time | 10 years (230Vac, 50% load @ 40°C) |
Safety | |
Electrical Safety | CB scheme : IEC 62368-1, IEC 60950-1, IEC 61010-1 & -2-201 TUV Bauart : EN 62368-1, EN 61010-1 & -2-201 UL/cUL : UL 62368-1 CCC : GB4943.1 EAC : TP TC 004/2011 |
CE | In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU |
EMC | |
Emission | CISPR 32, EN 55032, EN 61000-6-4, AS/NZS CISPR32, EN 61204-3 Compliance to FCC Title 47, EN 61000-6-3: Class B |
Immunity | EN 55035, EN 61000-6-2 Compliance to EN 61000-6-1 |
Harmonic Current Emissions | IEC/EN 61000-3-2, Class A |
Voltage Fluctuation and Flicker | IEC/EN 61000-3-3 |
ESD Immunity | IEC 61000-4-2 |
Radiated Immunity | IEC 61000-4-3 |
EFT | IEC 61000-4-4 |
Surge | IEC 61000-4-5 |
Magnetic Field | IEC 61000-4-8 |
Voltage Dips | IEC 61000-4-11 |
Component Power Supply for General Use | EN 61204-3 |