Dark Light
, ,

Fluke Networks MS-POE-KIT

Fluke Networks

Fluke Networks MS-POE-KIT Gks Güvenlik tarafından satışa sunulmaktadır. Ürün hakkında Detaylı bilgi almak için bizimle iletişime geçebilirsiniz.

Fluke Networks MS-POE-KIT

MicroScanner PoE Capabilities

  • Quickly determine if a problem is caused by a bad or unconnected cable, insufficient power, or a Powered Device (PD).
  • Information for the Network Engineer to investigate potential switch configuration or malfunctions.
  • PoE  Switch Verification– Determine if a switch port can provide enough power by reporting PoE class (0-8).
  • Powered Pairs– Graphically identifies powered pairs. Including Dual Signature where the switch port delivers power on 2 or 4 pairs (802.3bt or PoE ++)
  • Active Switch Detection- Determine if a cable is connected to a switch port and port speed up to 10G
  • Cable Testing– Identify any shorted, open or crossed wires at both ends, length of each pair, and send tones to find cables.
  • Validateand troubleshoot your Industrial Ethernet copper cabling
  • PoE Injector verification- Display injector voltage level

 

MicroScanner Series Features

  • Straightforward Interface– Graphical wiremap, length, cable ID, and distance to fault displayed on one screen
  • Multimedia Support– Tests all common media types including RJ11, RJ45, Coax(MS2 only), with no need for adapters
  • IntelliTone Toning– Trace virtually any cable or wire pair with IntelliTone digital and analog toning
  • VDV Service Detection– Verifies today’s media services, including 10/100/1000 Ethernet, POTS, and PoE
  • Oversized Display– Large, backlit LCD makes results crystal clear whether in bright sunshine or a dark closet
  • Magnetic Strap(included in MicroScanner kits) – Allows technicians to keep their hands free and their tester safe from potential drops and accidents with strong rare earth magnet

Streamlined verification testing
The MicroScanner™ Cable Verifier series simplifies the testing of voice, data, and video cable. It starts by taking results from what was four different test modes and displaying them all at once – graphical wiremap, pair lengths, distance to fault, cable ID, and far end device.  What’s more, it supports virtually any type of low-voltage cable testing with no need for awkward adapters.  The end result is reduced test time and technician error.  That makes high-quality installations more efficient than ever.

Rule out service problems fast
Today’s communications technicians have a lot more problems to deal with than just the cabling.  They have to rule out a whole host of potential cable and service issues before determining the cause of a connection problem.  The MicroScanner Cable Verifier series is equipped to answer the question to reduce time troubleshooting. Is there telephone voltage?  What’s the polarity?  Is there an Ethernet switch at the far end?  Is PoE available?  If PoE is available, is it enough to run my device? The MicroScanner Series acknowledges this, giving technicians the vision to verify today’s most common voice, data, and video services. That means faster, more comprehensive troubleshooting.

Enviromental Specifications
Operating temperature 32 °F to 113 °F (0 °C to 45 °C)
Storage temperature -4 °F to +140 °F (-20 °C to +60 °C)
Operating relative humidity (% RH without condensation) 90 % (50 °F to 95 °F 10 °C to 35 °C)
75 % (95 °F to 113 °F 35 °C to 45 °C)
Shock and Vibration Random, 2 g, 5 Hz-500 Hz (Class 2)
1 m drop test with and without wiremap adapter attached
Safety IEC 61010-1 3rd Edition
Altitude 4,000 m; Storage: 12,000 m
EMC IEC 61326-1
General Specifications
Test connectors Shielded 8-pin modular jack accepts 8-pin modular (RJ45) and
4-pin modular (RJ11) plugs.
MicroScanner2: F-connector for coaxial cable.
Power Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries
Battery life: 20 hours of typical use

Other compatible battery types: 2 AA photo lithium, NIMH, NICAD

Dimensions and weight (with batteries installed and wiremap adapter attached) 3 in x 6.4in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm)
MicroScanner2: 10.6 oz (300 g)
MicroScanner PoE: 10.6 oz (300 g)
Display Monochrome LCD with backlight
Test Modes
Cable test Measures length, verifies wiremap, identifies remote ID locators, and detects
Ethernet ports. MicroScanner PoE also shows HIGH Ω when the resistance of the
cable is more than 12.5 Ω.Displays results on one screen.
Tone Generates Intellitone™ and normal analog toning signals
PoE MicroScanner2: Solicits and detects the presence of 802.3af compatible PoE
(Power over Ethernet) devices MicroScanner PoE: Solicits and detects the presence
of 802.3af, at, bt, and UPOE (Cisco’s Universal Power over Ethernet) compatible PoE devices
Performance SpecificationsPerformance Specifications
Cable types tested Twisted pair: UTP, FTP, SSTP
Coaxial (MicroScanner2): 75 Ω, 50 Ω, 93 Ω
Length test Range: 460 m (1500 ft)
Resolution: 0.3 m (1 ft)
Typical accuracy: ± 4% or 0.6 m (2 ft) whichever is greater. NVP
uncertainty is an additional error. Calibration: User-settable NVP for
twisted pair and coax (MicroScanner2). Can determine actual
NVP with known length of cable.
Wiremap test Detects single-wire faults, shorts, miswires, split pairs, and up to
seven far-end adapter IDs.The wiremap is drawn with proportional
length to visually indicate the approximate location of faults.
Ethernet port detection MicroScanner2:Detects the advertised speed of 802.3 Ethernet ports
with speeds of 10 Mbps,100 Mbps, and 1 Gbps. MicroScanner
PoE: Detects the advertised speed of 802.3 Ethernet ports
with speeds of 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, and 10 Gbps.
Tone generator Supports toning and cable mapping with a Fluke Networks digital
IntelliTone™ probe. Generatesfour tones compatible with typical
analog probes. SmartTone™ feature gives positive identification
of cables in bundles when using an IntelliTone or an analog probe.

 

 

Markalar