İNNO V7 High Precision Cleaver
V7 High Precision Cleaver is an instrument for high precision fiber cutting. V7 can be installed with a variety of holders for ribbon cable up to 12 fibers as well as universal holder which is applicable to 250μm, 900μm, 3.0mm fiber cable and flat cable. Work efficiency can be maximized with easy and simple 2 step operations.
• High precision cleaving for ribbon fiber cable as well as 250μm, 900μm, 3.0mm and flat cable with universal holder
• V7+ as an optional model has an automatic collector for fiber shards and off cuts
• Available for single and ribbon cleaving up to 12 fibers
• Easy-step operation to complete the cleaving and collection of waste fiber shards automatically
• Convenient and quick to operate. Either hand-held or on table/worktop surfaces
• Very easy fiber setting and placing and, no need for blade height adjustment, therefore improving
work efficiency and low maintenance cost
• Smart design of pressure pads preventing the fiber from damage by the return of the blade carriage
• Each point of the blade can be used not only over 3000 times, but each blade has 16 cutting points, providing over 48,000 cleaves
• Made for magnesium alloy materials, giving high strength and stability. Small, compact size and light weight
Type | Single fiber and ribbon fiber |
Cladding Diameter | 125μm |
Cleaved Length | Single fiber: 8~20mm / Ribbon fiber: 10mm |
Applicable Fiber Cable | Single fiber: 250μm, 900μm, 3.0mm fiber cable and flat cable Ribbon fiber: 2 to 12 ribbon fiber cable |
Typical Cleaved Angle | Less than 0.5 Degrees |
Typical Blade Life Span | Total 48,000 fiber cleaves (1,000 fiber for 1 step * total 16 points * 3 heights) |
Operation Steps | 2 Steps |
Reclaim Function | Blade pushback |
Holder | Single: Universal holder / Ribbon: Replaceable holder |